

Cleans all kinds of residues from the cooling system. Both rust and sludge, etc. If the system is blocked, it will unblock it quickly. It removes residues from the cooling system behind the cylinders, thus stabilising the operating temperature of the cylinders and reducing wear. Cleans water pump seals and bearings of ethylene glycol residues that can corrode seals. The package is designed for a cooling system with a coolant capacity of 10 - 17 litres. Does not contain acids. Do not open the radiator cap when the engine is hot, it is dangerous!
Use:
- Switch off the engine and allow to cool.
- Switch off the engine, turn off the radiator and leave the radiator cap off.
- If the heater is fully open, remove all coolant from the system.
- If the coolant system is disconnected, remove all coolant from the radiator.
- Pour the resulting solution into the cooling system.
- Adjust the volume of the coolant to the prescribed level by adding water to the mixture.
- Start the engine, warm up the engine at idling speed between 1500 and 2500 rpm for 5 to 7 minutes.
- Switch off the ignition, allow the engine to cool down.
- Discharge the mixture of water and radiator coolant from the cooling system (radiator drain plug).
- Flush the cooling system with water until the water leaving the cooling system is completely clean.
- Refill the system with new coolant following the engine manufacturer's instructions.
Caution.
Contains: Ethanediol, Tetrasodium ethylenediaminetetraacetate, Sodium sulphite, Trisodium orthophosphate. Harmful if swallowed. Causes skin irritation. Causes serious eye damage. When seeking medical advice, take the product container or label with you. Keep out of reach of children. Wear protective goggles. IN CASE OF INJURY IN EYES: Rinse gently with water for several minutes. Remove contact lenses if worn and if easy to remove. Rinse again. Contact a doctor immediately. Dispose of contents/container to an authorised waste handler or return to the supplier.
UFI: 2Q10-F0GF-000N-9M6A
If you encounter any problems or need additional help, contact our customer support. We’ll be happy to assist you.