Epoxy glue Standard 2x12ml

Two-component adhesive for bonding different materials: PVC, plastics (except PP, PE, PTFE), wood, metal (including alloys), porcelain, stone, concrete, glass, marble, etc. For covering electronic components - the adhesive fills cracks and does not shrink. Particularly effective for bonding heavy, uneven surfaces. The bonded joint is resistant to temperature, water, oil, petrol. Two-chamber syringe facilitates accurate and easy dispensing of ingredients. After curing, the adhesive can be painted and finished.

Application:

1. Surfaces to be joined must be clean (e.g. use sandpaper), thoroughly remove oil and grease.

2. Squeeze the required amount of adhesive and hardener from the syringe and mix thoroughly until a uniform colour is achieved (this will determine the effectiveness of the result).

3. Apply the prepared mixture to one of the surfaces to be bonded, pressing the bonded surfaces firmly together if necessary.

4. After bonding, keep the bonded surfaces stationary, if necessary pressurised, until the adhesive has cured.

Colour: beige

Application time after mixing: 60 minutes

Initial cure: 240 minutes (at +25°C).

Full cure: 48 hours

Temperature resistance: -30°C to +90°C