Epoxy paste for metal 100g

Description

Metal epoxy paste is a two-component thixotropic composite. It is used for the repair and regeneration of elements made of steel, cast steel, iron and non-ferrous metals. Once fully cured, the repaired surface can be machined (drilled, ground, threaded). Resistant to atmospheric agents, temperatures and aggressive chemical compounds (acids, alkalis, solvents, petrol). Thanks to its properties, the product is an alternative to expensive repairs. Wide range of applications in garages, workshops, industries, factories and households.

Application examples:
- Repair and regeneration of damaged bearing seats.
- Repair and reconditioning of worn shafts
- Removal of casting defects from cast iron, steel and non-ferrous metal components.
- repair of gears and guides
- repair of metal elements requiring further processing (turning, milling, threading, grinding).

HOW TO USE
1. Roughen surfaces with sandpaper or file before repair.
2. Remove dirt and grease from the surfaces.
3. Prepare a mixing bowl for mixing the paste components.
4. Using different spatulas, place equal amounts of components A+B in the mixing bowl.
5. Mix the components thoroughly until the mixture reaches a uniform colour.
6. Apply a coat of the mixture to the surface to be repaired, carefully filling cracks and holes.
7. The repair must be completed within 30 minutes after mixing the components.

The areas to be repaired may be reinforced with T-048 fibreglass mesh.

TIPS AND RECOMMENDATIONS
Before mixing the components, place the containers with components A+B in hot water for about 5 minutes. The heated components will have a lower viscosity, making it easier to remove and mix them from the containers in the quantities required for the repair.
Do not mix components A+B in larger quantities than can be used within 30 minutes.
Repair time can be shortened by heating the repaired area with hot air.
The repaired areas can be reinforced with fibreglass mesh (T-048).

Colour: dark grey
Application time after mixing: 30 min.
Initial setting: 120 min. (at +20C)
Full curing: 24 hours
Temperature resistance: -40C to +120C

• Secure payment options We only use the safest payment systems.
• 14-day return policy We do our best to keep our customers happy.
• Fast delivery across Estonia Quality auto parts delivered to your door