Speedy glue for mirror and glass 8g

Description

A high-quality adhesive that bonds glass permanently to metal. Resistant to UV, moisture, temperature and most chemicals. The included brush provides an excellent coating and is ideal for large surfaces and hard-to-reach areas. Use the shock and vibration absorbing rubber pad supplied to secure the rear view mirror.

Use:
For best results, surfaces to be bonded must be clean, free of grease and dry.
1. Precisely mark the position of the foot/bracket of the mirror to be mounted on the window glass (it is not advisable to adjust it during installation).
2. Remove the mirror from the bracket/mirror stand.
3. Apply the adhesive to the metal surface of the mirror holder for bonding. The adhesive layer must be even and as thin as possible.
4. Place a grease-cleaned rubber pad on a smooth horizontal surface, e.g. a table, and press it against the mirror holder; hold the pressed elements for 10 seconds with equal force.
5. Cut the excess rubber to the size of the support surface of the mirror holder.
6. Apply a second, thin and even layer of glue with a brush to the rubber pad attached to the holder.
7. Press the mirror holder firmly, without shifting, and with equal force against the car window glass, holding it pressurized and in place for 20-30 seconds.
8. Leave the holder for at least 1 hour, then attach the mirror to the mirror holder.
Excess glue can be removed using Technicqll Instant Glue Remover (P-093).
Viscosity: 80 cP
Max. Max. fillable gap: 0,10 mm
Temperature resistance: -55°C to +80°C
Storage temperature: +5ºC to +20ºC

• Secure payment options We only use the safest payment systems.
• 14-day return policy We do our best to keep our customers happy.
• Fast delivery across Estonia Quality auto parts delivered to your door